Versatile orbital motors
Optimisation of performance
Our complete White range of high performance and efficient Orbital Motors up to 80kw, covering small and large applications.
White Versatile orbital motors
White orbital motors offer a wide range of types for different applications. Recommended oil types vary by model and can include hydraulic oils with anti-wear, anti-foam and dewatering agents. Fluid viscosity and filtration are also important factors, with a recommended viscosity of 20-43 cSt at operating temperature. Oil temperature should not exceed 85°C to ensure optimum performance. Selecting the right oil and proper maintenance will contribute to the life and efficiency of White orbital motors.
___________________________________________________________________________________________________________________________________________________________________________
OMR X | OMR - OMRW
Description OMR X
New generation of OMR
Orbital Motors with state of art shaft seal.
- A Modular platform, and form and fit with existing applications
- Improves performance
- Reduces total cost of ownership
Specifications
- Displacement 50 - 400 cm³
- Max. cont. pressure 200 bar
- Max. cont. torque 400 Nm
- Max. cont. flow 60 l/m
- Available with seal protector & speed sensor
- State of the art high pressure shaft seal
- Available with end ports and aligned or offset side ports
Description OMR - OMRW
Flexible configuration
Makes your hydraulic system adaptable to numerous medium-duty needs.
- Light and compact and therefore easy to install
- High radial and axial bearing capacity
- Spool valve integrated with output shaft
- Gear rim with rollers and suitable for long periods of operation at high pressure
Specifications
- Displacement 50 - 375 cm³
- Max. cont. pressure 175 bar
- Max. cont. torque 580 Nm
- Max. cont. flow 60 l/m
- Available with offset side ports and aligned end ports
- Available with brake
- Available with ATEX
___________________________________________________________________________________________________________________________________________________________________________
OML
Description
Precise sizing for your machine’s lighter or seasonal tasks
- Ideal mini motor for industrial and mobile applications
- Spool valve integrated with output shaft
- Gearwheel set with fixed rim
- Suitable for long periods of operation at moderate pressure and short periods of operation at high pressure
- High radial and axial bearing capacity
Specifications
- Displacement 8 - 32 cm³
- Max. cont. pressure 70 bar
- Max. cont. torque 29 Nm
- Max. cont. flow 16 l/m
- Available with rear ports only
- Available with 4-bolt mounting only
___________________________________________________________________________________________________________________________________________________________________________
OMM
Description
PRECISE SIZING FOR YOUR MACHINE’S LIGHTER OR SEASONAL TASKS
- Ideal mini motor for industrial and mobile applications
- Spool valve integrated with output shaft
- Gearwheel set with fixed rim
- Suitable for long periods of operation at moderate pressure and short periods of operation at high pressure
- High radial and axial bearing capacity
Specifications
- Displacement 8 - 32 cm³
- Max. cont. pressure 70 bar
- Max. cont. torque 29 Nm
- Max. cont. flow 16 l/m
- Available with rear ports only
- Available with 4-bolt mounting only
___________________________________________________________________________________________________________________________________________________________________________
OMH
Description
Bigger dimensioned medium size motor
Easy installation.
- Flexible configuration makes the hydraulic system adaptable to numerous medium-duty needs
- Light and compact and therefore easy to install
- High radial and axial bearing capacity
- Spool valve integrated with output shaft
Specifications
- Displacement 200 - 500 cm³
- Max. cont. pressure 175 bar
- Max. cont. torque 840 Nm
- Max. cont. flow 75 l/m
- Basically, an up-scaled OMR
___________________________________________________________________________________________________________________________________________________________________________
VIS 40/45
Description
MAXIMIZED DRIVE STRENGTH
COMPACT PACKAGE SIZE
- Patented valve-in-star (VIS)Gerolertechnology in a compact design
- Powerful motors with increased drive train strength
- Great torque capability
- Variety of optional features including two-speed option, brake packages, and case flow solutions for both closed-loop and open-loop applications
Specifications
- Displacement 325 – 1.560 cm³
- Max. cont. pressure 310 bar
- Max. cont. torque 4.520 Nm
- Max. cont. flow 170 l/m
- Max. brake holding torque 3.560 Nm
- Available with integrated brake
- Available in single and 2-speed versions
- Available with Standard, Short and Wheel mount options
___________________________________________________________________________________________________________________________________________________________________________
HP 30
Description
Exceptional starting torque efficiency
Two-speed capability
- Disc valving system
- Optimized eccentricity to improve starting torque efficiency without sacrificing overall torque capacity or endurance
- Low No-Load Pressure Drop (NLPD) allowing for less wasted energy and thus lower system operating temperatures
- Series circuit capability which reduces system cost compared to parallel circuit designs
Specifications
- Displacement 344 - 677 cm³
- Max. cont. pressure 310 bar
- Max. cont. torque 2.469 Nm
- Max. cont. flow 170 l/m
- Max. brake holding torque 3.570 Nm
- Available with integrated brake
- Available in single and 2-speed versions
- Available with Standard, Short and Wheel mount options
___________________________________________________________________________________________________________________________________________________________________________
RS
Description
- Geroller, Spool valve, Two-zone motor
- Journal bearings
- High pressure shaft seal as a standard
- Cavity for Relief Valve optional
Specifications
- Displacement 50 - 400 cm³
- Max. cont. pressure 121 bar
- Max. cont. torque 375 Nm
- Max. cont. flow 75 l/m
___________________________________________________________________________________________________________________________________________________________________________
D9
Description
Excellent high-power motor for heavy-duty applications.
- medium size motor for applications with high-duty cycles or frequent direction reversal
- Four Bearing Options allow load carrying capabilities of motor to be matched to application
- Three-zone orbiting valve precisely meters oil to produce exceptional volumetric efficiency
- Compact housing contributes to high power-to-weight ratio of motor and offers front and rear mounting flanges
Specifications
- Displacement 260 - 1.000 cm³
- Max. cont. pressure 207 bar
- Max. cont. torque 2.290 Nm
- Side port options
- Available with C flange and wheel mount options
___________________________________________________________________________________________________________________________________________________________________________
RE/RC
Description
STABLE PERFORMANCE AT LOW SPEEDS
FOR A WIDE RANGE OF APPLICATIONS
- Highly efficient and dependable
- Especially suited for low flow and high pressure (e.g.: AWPsituations)
- Four bearing options, combined with standard mounting flanges and output shafts, allow the motor to be configured to suit nearly any application
Specifications
- Displacement 120 - 750 cm³
- Max. cont. pressure 207 bar
- Max. cont. torque 1.096 Nm
- Available with drum brake, max. brake holding torque 565 Nm
- Available with drum brake option
- Available with 4-and 5-bolt hub
- Available with Wheel and Magneto mount options
___________________________________________________________________________________________________________________________________________________________________________
HB | HK
Description
Highly efficient and durable
Medium duty Hydraulic motor
- Forced Drive Link Lubrication reduces wear and promotes longer life from motor
- High volumetric efficiency
- Rubber Energized Steel Face Seal does not extrude or melt under high pressure or high temperature
- 3-Zone Motor
Specifications
- Displacement 50 - 400 cm³
- Max. cont. pressure 207 bar
- Max. cont. torque 946 Nm
- Max. brake holding torque 1.130 Nm
- Available with integrated brake
- Side and end port options
___________________________________________________________________________________________________________________________________________________________________________
DT
Description
EXCELLENT HIGH-POWER MOTOR
FOR HEAVY-DUTY APPLICATIONS
- Medium size motor for applications with high-duty cycles or frequent direction reversal
- Four Bearing Options allow load carrying capabilities of motor to be matched to application
- Three-zone orbiting valve precisely meters oil to produce exceptional volumetric efficiency
- Compact housing contributes to high power-to-weight ratio of motor and offers front and rear mounting flanges
Specifications
- Displacement 300 - 2.100 cm³
- Max. cont. pressure 207 bar
- Max. cont. torque 2.661 Nm
- Max. brake holding torque 1.582 Nm
- Available with integrated brake
- Side and end port options
- Available with C flange, Wheel, Wheel Hub and mount options
___________________________________________________________________________________________________________________________________________________________________________
DH
Description
FLEXIBLE CONFIGURATION
Makes your Hydraulic System adaptable to numerous medium duty needs.
- Light and compact and therefore easy to install
- High radial and axial bearing capacity
- Spool valve integrated with output shaft
Specifications
- Displacement 36 - 400 cm³
- Max. cont. pressure 124 bar
- Max. cont. torque 10 Nm
- Max. cont. flow 60 l/m
- Designed to match Char-Lynn H-series
- Available with aligned side ports
- Available with Standard mount options
- Shorter than OMP
___________________________________________________________________________________________________________________________________________________________________________
OMEW
Description
DESIGNED MAINLY FOR PROPEL APPLICATIONS
OPTIMIZED FOR DIFFERENT CONDITIONS
- Two options: standard and with low-speed option
- Compact design & low weight
- High total efficiency & starting torque
- Smooth low speed performance
- Large bearing capacity
- High pressure shaft seal
- No drain line
Specifications
- Displacement 50 - 375 cm³
- Max. cont. pressure 138 bar
- Max. cont. torque 455 Nm
- Max. cont. flow 60 l/m
- Designed to match Char-Lynn S-series
- Available with aligned side ports
- Available with Standard mount options
___________________________________________________________________________________________________________________________________________________________________________
CE
Description
The combination of compact size, light weight and low speed efficiency make the CE motor the best wheel drive motor available!
- 10-25% lighter and more compact than competitive designs
- Perfect for applications with strict weight and size requirements
- Three Bearing Options allow load carrying capability of motor to be matched to application
Specifications
- Displacement 120 - 750 cm³
- Max. cont. pressure 207 bar
- Max. cont. torque 1.082 Nm
- Available with drum brake, max. holding torque 565 Nm
- Available with 4-and 5-bolt hub
- Wheel mount motor
___________________________________________________________________________________________________________________________________________________________________________
DS
Description
FLEXIBLE CONFIGURATION
Makes your Hydraulic System adaptable to numerous medium duty needs.
- Light and compact and therefore easy to install
- High radial and axial bearing capacity
- Spool valve integrated with output shaft
- Gear rim with rollers and suitable for long periods of operation at high pressure
Specifications
- Displacement 50 - 375 cm³
- Max. cont. pressure 138 bar
- Max. cont. torque 455 Nm
- Max. cont. flow 60 l/m
- Designed to match Char-Lynn S-series
- Available with aligned side ports
- Available with Standard mount options
___________________________________________________________________________________________________________________________________________________________________________
DR
Description
EXCELLENT HIGH-POWER MOTOR
FOR HEAVY-DUTY APPLICATIONS
- Medium size motor for applications with high-duty cycles or frequent direction reversal
- Four Bearing Options allow load carrying capabilities of motor to be matched to application
- Three-zone orbiting valve precisely meters oil to produce exceptional volumetric efficiency
- Compact housing contributes to high power-to-weight ratio of motor and offers front and rear mounting flanges
Specifications
- Displacement 200 - 750 cm³
- Max. cont. pressure 207 bar
- Max. cont. torque 1.107 Nm
- Max. brake holding torque 1.582 Nm
- Available with integrated brake
- Side and end port options
- Available with C flange, wheel, wheel hub and mount options
___________________________________________________________________________________________________________________________________________________________________________
WS 350
Description
A heavy-duty hydraulic motor for applications that require greater torque under demanding conditions
- Ideal for agricultural equipment, skid steer attachments
- High brand value and preferred product in NAM
- High performance in low-medium duty cycle applications
- High reliability
- Lower price
Specifications
- Displacement 80 - 500 cm³
- Max. cont. Pressure 207 bar
- Max. cont. Torque 861 Nm
- Side and end port options
- Available with Standard, Short and Wheel mount option
___________________________________________________________________________________________________________________________________________________________________________
